Svenska Engelska

Standarder for product compliance

På EK Power Solutions har vi arbetat med många produkter och standarder. Vi vet hur man konstruerar för att uppfylla normkraven för CE-märkning och UL-godkännande. Här kan du se ett urval på standarder som vi har arbetat med och som finns i vårt standardbibliotek.

General standards

EN 55016-2-1 Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-1: Methods of measurement of disturbances and immunity – Conducted disturbance measurements
EN 60068-1 Basic environmental testing procedures – Part 1: General and guidance
EN 60068-2-2 Environmental testing – Part 2: Tests. Tests B: Dry heat
EN 60068-2-27 Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
EN 60068-2-30 Environmental testing – Part 2: Tests – Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle)
EN 60068-2-47 Environmental testing – Part 2-47: Test – Mounting of specimens for vibration, impact and similar dynamic tests
EN 60068-2-64 Environmental testing – Part 2-64: Tests – Test Fh: Vibration, broadband random and guidance
EN 61000-3-11 Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤ 75 A and subject to conditional connection
EN 61000-3-12 Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
EN 61000-3-2 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
IEC 61000-3-4 Electromagnetic compatibility (EMC) – Part 3-4: Limits – Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 61000-3-5 Electromagnetic compatibility (EMC) – Part 3-5: Limits – Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
EN 61000-4-11 Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-4-15 Electromagnetic compatibility (EMC) – Part 4-15: Testing and measurement techniques – Flickermeter – Functional and design specifications
EN 61000-4-2 Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test
IEC 61000-4-4 Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test
EN 61000-4-5 Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test
EN 61000-4-6 Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity standard for industrial environments
EN 61000-6-3 Emission standard for residential, commercial and light-industrial environments
EN 61000-6-4 Emission standard for industrial environments
EN 61312-1 Protection against lightning electromagnetic impulse – Part 1: General principles
EN 61340-5-1 Protection of electronic devices from electrostatic phenomena – General requirements
EN 61326-3-1 Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

Railway

EN 50153 Railway applications -Rolling stock – Protective provisions relating to electrical hazards
EN 50155 Railway applications – Electronic equipment used on rolling stock
EN 50163 Railway applications -Supply voltages of traction systems
EN 60373 Rolling stock equipment – Shock and vibration tests
EN 50121-3-1 Rolling stock – Train and complete vehicle, Electromagnetic compatibility
EN 50121-3-2 Rolling stock – Apparatus, Electromagnetic compatibility
EN 50124-1 Insulation coordination – Basic requirements – Clearances and creepage distances for all electrical and electronic equipment
EN 60077-1 Electric equipment for rolling stock – General service conditions and general rules
RIA12 General Specification for Protection of Traction & Rolling Stock Electronic Equipment from Transient & Surges in DC Control System

Tools

EN 12348 Core drilling machines on stand – Safety
EN 55014-1 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
EN 55014-2 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity – Product family standard
EN 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements
EN 60335-2-45 Household and similar electrical appliances – Safety – Part 2-45: Particular requirements for portable heating tools and similar appliances
EN 60745-1 Hand-held motor-operated electric tools – Safety – Part 1: General requirements
EN 60745-2-1 Hand-held motor-operated electric tools – Safety – Part 2-1: Particular requirements for drills and impact drills
IEC 62841-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 1: General requirements
IEC 62841-2-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches

IT

EN 55022 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
EN 60950-1 Information technology equipment – Safety – Part 1: General requirements
EN 60950-22 Information technology equipment – Safety – Part 22: Equipment to be installed outdoors
IEEE 802.3 af CSMA/CD/ POE / Power over ethernet
IEEE 802.3 at CSMA/CD/ POE+/ POE Plus

Defence

MIL-STD 1275D Characteristics of 28 volt DC electrical systems in military vechiles
MIL-STD 461F Requirements for the control of electromagnetic interference characteristics of subsystems and equipment
MIL-STD 704D Aircraft electric power characteristics
MIL-STD 704F Aircraft electric power characteristics
MIL-STD 810F Environmental engineering considerations and laboratory tests

Medical

EN 60601-1 Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
EN 61010-2-30 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-030: Particular requirements for testing and measuring circuits
EN 61326-1 Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements

ATEX/EX

EN 50020 Electrical apparatus for potentially explosive atmospheres – Group I – Intrinsically safe systems – Part 1: Construction and testing
EN 60079-0 Explosive atmospheres – Part 0: Equipment – General requirements
EN 60079-11 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety ”i”
EN 60079-15 Explosive atmospheres – Part 15: Equipment protection by type of protection ”n”

Batteries

IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications – Part 1: Nickel systems
EN 60335-2-29 Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers
IEC 61951-2 Secondary cells and batteries containing alkaline or other non acid electrolytes – Secondary sealed cells and batteries for portable applications – Part 2: Nickel-metal hydride NiMH
IEC 61960-3 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications – Part 3: Prismatic and cylindrical lithium secondary cells and batteries made from them

Trucks

EN 12895 Industrial trucks – Electromagnetic compatibility
EN 1175-1 Safety of industrial trucks – Electrical requirements – Part 1: General requirements for battery powered trucks

Vehicals

ISO 6469-1 Electrical Vehicals – Safety specifications – Part 1: On-board rechargeable energy storage system (RESS)
ISO 6469-2 Electrically propelled road vehicles – Safety specifications – Vehicle operational safety
ISO 6469-3 Electrical Vehicals – Safety specifications
ISO 6469-3 Electrically propelled road vehicles – Safety specifications – Electrical safety
ISO 6469-4 Electrically propelled road vehicles – Safety specifications – Post crash electrical safety requirements

Machinery

ISO 13850 Safety of machinery – Emergency stop function – Principles for design
ISO 13849-1 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design
IEC 60204-1 Safety of machinery – Electrical equipment of machines – Part 1: General requirements

Other

EN 60558-1 Transformers
EN 60870-2-1 Telecontrol equipment and systems – Part 2: Operating conditions – Section 1: Power supply and electromagnetic compatibility
EN 60255-21-1 Electrical relays – Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Section One: Vibration tests (sinusodial)
EN 60255-5 Electrical relays – Part 5: Insulation co-ordination for measuring relays and protection equipment – Requirements and tests
EN 55032 Electromagnetic compatibility of multimedia equipment – Emission requirements
EN 60945 Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
EN 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications
EN 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
EN 12015 Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission
EN 12016 Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity
IEC 60664-1 Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests
IEC 60664-2-2 Insulation coordination for equipment within low-voltage systems – Part 2-2: Interface considerations – Application guide
IEC 60664-3 Insulation coordination for equipment within low-voltage systems – Part 3: Use of coatings to achieve insulation coordination of printed board assemblies
EN 55011 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
IEC 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing
EN 61131-2 Programmable controllers – Part 2: Equipment requirements and tests
TIA 455-129 Procedures for Applying Human Body Model Electrostatic Discharge Stress to Package Optoelectronic Components
EN 60384-14 Fixed capacitors for use in electronic equipment – Part 14: Sectional specification – Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN 50130-4 Alarm systems – Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
EN 50131-6 Alarm systems – Intrusion systems – Part 6: Power supplies
EN 2282 Aerospace series – Characteristics of aircraft electrical supplies

Kontaktpersoner

Fredrik Ståhl

CEO
+46 708641533
Maila mig »

Vidar Wernöe

Affärsutveckling och sälj
+46 (0)8 446 56 15
Maila mig »

Certifikat & Medlemskap

Copyright 2015 EK Power Solutions AB - Brandson AB - Webbyrå Stockholm - Sitemap